COCKPIT SX 9 M-LINK TX only

Item No.: 45161

Content:
1 COCKPIT SX 9 transmitter
1 USB charging cable
434,40 €
Price incl. VAT plus Shipping

In Stock.

Description
Cockpit SX 9-channel M-LINK remote control - easier than ever!

The MULTIPLEX COCKPIT SX 9 sets new standards in the field of 9-channel hand-held transmitters.
touch and fly! – Operation like a smartphone!
The COCKPIT SX 9 can be programmed intuitively and very easily using its app symbols. The ideal remote control for RC fixed-wing models, RC helicopters and RC copters.
The COCKPIT SX 9 is 100% developed and built in Germany. QualityMade in Germany!

TFT color touch display Clear, transflective color display 3.5", 320x240 pixels, touch screen with meaningful symbols and large, easy-to-read digits/letters. Can be read in sunlight without backlighting: ideal for model sports. Extremely energy-efficient in outdoor use thanks to automatic day/night switching. Transmitter operating time up to 24 hours possible.

Simple and extensive programming options via the new model assistant
Intuitive operation through a sophisticated touch concept with clear screens and many self-explanatory graphics. A comfortable model assistant with a variety of options for value adjustment via the touchscreen. The simplest adjustment via slider, direct value input with the alphanumeric keyboard, +/- and buttons for fine adjustment ensure the simplest programming of your models.

Super convenient model memory management
The COCKPIT SX 9 is equipped with 200 internal model memory locations, the model memories are stored on the internal SD card in .xml format. A comfortable model memory management on the PC via USB mass memory is therefore easily possible.

Outstanding voice acting
With over 450 words, numbers and phrases, it is one of the most advanced systems of its kind ever built into a handheld transmitter.
The use of this system allows COCKPIT SX 9 pilots to perceive critical telemetry data and transmitter functions without taking their eyes off the flight. The COCKPIT SX 9 tells you the specific sensor values if required. Should an alarm go off, you don't have to look at the display to see what's going on, the COCKPIT SX 9 tells you.

return channel/telemetry
When using a telemetry-capable receiver, the current voltage of the receiver power supply is shown on the transmitter display. If the voltage falls below an adjustable min. voltage, an acoustic signal warns that the receiver battery is about to run out. Without a sensor, the connection quality (LQI) can also be shown on the transmitter display in percentage values.
An additional safety plus!
In addition, up to 8 telemetry data from the model (depending on the sensors connected to the receiver, e.g. voltage, current, temperature, etc.) can be shown on the display (examples of use: engine temperature, drive battery voltage, power consumption of the drive). The telemetry data is stored in the model in connection with the optional MULTIPLEX FlightRecorder (# 8 5420). The display of the sensor values is freely configurable, dynamic adjustment of the displays.

Wireless teacher/student operation
The COCKPIT SX 9 M-LINK can be both a teacher and student transmitter as standard. All L/S-compatible M-LINK transmitters can be used as student or teacher transmitters. The optional COPILOT module (# 4 5184) is required for teacher operation. The COCKPIT SX 9 works with selective L/S operation. This allows complete transfer or, depending on the student's learning progress, the transfer of individual control functions to the student. The teacher can only take over the model again by touching the sticks.

Dual rate and expo can be set separately for each phase
For 3 axes (aileron, elevation, rudder) plus expo for gas.

3 timers
• Timer 1: mm:ss selectable start/stop switch, alarm function, voice output, vibration
• Timer 2: selectable mm:ss start switch, alarm function, voice output, vibration
• Timer 3: hh:mm transmitter operating time counter

You can find helpful videos on the subject of menu navigation and programming at: MULTIPLEX FAQ Videos

Future-proof through software updates
MULTIPLEX is constantly developing the COCKPIT SX 9 software. You can always use the MULTIPLEX Launcher at www.multiplex-rc.de to update your remote control free of charge.

Equipment: COCKPIT SX9
• LiFe battery 3.3V/4000mAh
• SD card
• 2 proportional encoders
• 6 switches
• 2 buttons

Technical features:

• future-oriented 9-channel remote control - 9 fully proportional control channels
• 32-bit ARM7 processor
• 2.4 GHz M-LINK transmission Secure, ultra-fast, digital signal transmission with real-time telemetry
• Analogue and digital servo mode
• IOAT antenna - integrated radiation-optimized antenna technology with extremely long range
• 3.5" large new TFT color touch display with telemetry display and DAY/NIGHT switchover, daylight REAL
• 4 ball-bearing stick units (mechanics of the PROFI TX)
• Completely expanded with all necessary operating elements and switches
• Speech output (D,E,F) via loudspeaker or earphone socket
• USB socket (charge transmitter battery, PC interface for firmware updates, data management
• Modern, ergonomically optimized housing design
• Light weight
Integrated 2.4 GHz transmission technology M-LINK
• µSD card for model storage
Long operating time up to 24 hours

software features:

• "Smartphone-like" operation thanks to a clear and concise menu structure
• Model assistant guides you through the programming
• Slide function – e.g. PITCH CURVES can be set by touching and dragging
• Predefined templates for almost all common planes and helicopter models
Area of application including:
GLIDER 2 FLAPS
GLIDER 4 flaps + spoilers
V-TAIL
MOTOR PLANES
AEROBATIC PLANES
Jets (DELTA)
FLYING WING
HELI 120 degrees
HELI 90 degree flybarless
MULTICOPTER

• Safety: Gas check, transmitter battery monitor
• Intelligent speech output D / E / F
• Announcement of telemetry data, warnings, alarms and vario signal via speakers or headphones
• Real-time data transmission
• Optional sensors (Vario, GPS, fuel, temperature, voltage, current, speed and much more)
• Vibrating alert and "Warning" LEDs for critical alerts
• Digital trimming, can be switched off for specific flight phases for heli flybar systems and MULTICOPTER
• 3 timers with voice output
Freely adjustable control mode (aileron, elevator, rudder, gas, spoiler)
(1x total time timer, 1x motor running time, 1x transmitter operating time)
• Numerous servo settings (path, limit, reversal, center position)
• Dual rate and expo, separately adjustable for each flight phase
• 3 flight phases (area)
• 4 flight phases (heli)
• Heli GAS and collective pitch curves (9 points) can be set separately for each flight phase
• Aileron differentiation, separately adjustable for each flight phase
• Snap flap
• Butterfly function
• FREE SERVO ASSIGNMENT
• Wireless teacher/student operation possible with optional COPILOT
• Multifunctional USB socket (charge transmitter battery, PC interface for firmware updates, data management)
• µSD card for model storage - 200 model memories
• Model copy function
Video Clips
Optional Accessories
Spare Parts